WATCH

WATCH

A watch is a small clock, typically worn either on the wrist or attached on a chain and carried in a pocket; wristwatches, however, are the most common type of watch used today. Watches evolved in the 17th century from spring powered clocks, which appeared in the 15th century. The first watches were strictly mechanical. As technology progressed, the mechanisms used to measure time have, in some cases, been replaced by use of quartz vibrations or electromagnetic pulses.[1] The first digital electronic watch was developed in 1970.[2]

Before wristwatches became popular in the 1920s, most watches were pocket watches, which often had covers and were carried in a pocket and attached to a watch chain or watch fob.[3] In the early 1900s, the wristwatch, originally called a Wristlet, was reserved for women and considered more of a passing fad than a serious timepiece. Men, who carried pocket watches, were quoted as saying they would "sooner wear a skirt as wear a wristwatch".[4] This changed in World War I, when soldiers on the battlefield found pocket watches to be impractical and attached their watches to their wrist by a cupped leather strap. It is also believed that Girard-Perregaux equipped the German Imperial Navy with wristwatches in a similar fashion as early as the 1880s, to be used while synchronizing naval attacks and firing artillery.[4]

Most inexpensive and medium-priced watches used mainly for timekeeping are electronic watches with quartz movements.[1] Expensive collectible watches, valued more for their workmanship and aesthetic appeal than for simple timekeeping, often have purely mechanical movements and are powered by springs, even though mechanical movements are less accurate than more affordable quartz movements. In addition to the time, modern watches often display the day, date, month and year, and electronic watches may have many other functions. Watches that provide additional time-related features such as timers, chronographs and alarm functions are not uncommon. Some modern designs even go as far as using GPS[5] technology or heart-rate monitoring[6] capabilities.

The study of timekeeping is known as horology.

Compared to electronic movements, mechanical watches are less accurate, often with errors of seconds per day, and they are sensitive to position, temperature[9] and magnetism.[10] They are also costly to produce, require regular maintenance and adjustment, and are more prone to failure. Nevertheless, the craftsmanship of mechanical watches still attracts interest from part of the watch-buying public. Skeleton watches are designed to leave the mechanism visible for aesthetic purposes.

Mechanical movements use an escapement mechanism to control and limit the unwinding and winding parts of a spring, converting what would otherwise be a simple unwinding into a controlled and periodic energy release. Mechanical movements also use a balance wheel together with thebalance spring (also known as a hairspring) to control motion of the gear system of the watch in a manner analogous to the pendulum of a pendulum clock. The tourbillon, an optional part for mechanical movements, is a rotating frame for the escapement, which is used to cancel out or reduce the effects of gravitational bias to the timekeeping. Due to the complexity of designing a tourbillon, they are very expensive, and only found in "prestige" watches.

The pin-lever escapement (called the Roskopf movement after its inventor, Georges Frederic Roskopf), which is a cheaper version of the fully levered movement, was manufactured in huge quantities by many Swiss manufacturers as well as Timex, until it was replaced by quartz movements.[11][12][13]

Tuning-fork watches use a type of electromechanical movement. Introduced by Bulova in 1960, they use a tuning fork with a precise frequency (most often 360 hertz) to drive a mechanical watch. The task of converting electronically pulsed fork vibration into rotary movement is done via two tiny jeweled fingers, called pawls. Tuning-fork watches were rendered obsolete when electronic quartz watches were developed. Quartz watches were cheaper to produce and even more accurate.

Traditional mechanical watch movements use a spiral spring called a mainspring as a power source. In manual watches the spring must be rewound periodically by the user by turning the watch crown. Antique pocketwatches were wound by inserting a separate key into a hole in the back of the watch and turning it. Most modern watches are designed to run 40 hours on a winding and thus must be wound daily, but some run for several days and a few have 192-hour mainsprings and are wound weekly.